JUNOSe 9.1.x Multicast Routing Configuration Guide > Configuring Multicast Listener Discovery > Disabling and Removing MLD

Disabling and Removing MLD

You can disable and reenable MLD on the VR. You can also remove MLD from the VR and re-create it on the VR.

mld disable

• Use to disable MLD on a VR.
• Example

host1(config)#virtual-router boston

host1:boston(config)#router mld

host1:boston(config-router)#mld disable

• Use the no version to enable MLD on a VR.

router mld
    ipv6 router mld

• Use to create and enable MLD on a VR or to access MLD Router Configuration mode.
• Example 1

host1(config)#virtual-router boston

host1:boston(config)#router mld

• Example 2

host1(config)#virtual-router boston

host1:boston(config)#ipv6 router mld

• Use the no version to delete MLD and MLD proxy from the VR.