JUNOSe 9.1.x Multicast Routing Configuration Guide > Configuring IPv4 Multicast > Using Unicast Routes for RPF

Using Unicast Routes for RPF

You can specify that IS-IS, OSPF, or RIP routes be available for RPF. Routes available for RPF appear in the multicast view of the routing table.

ip route-type

• Use to specify whether IS-IS, OSPF, or RIP routes are available only for unicast forwarding, only for multicast RPF checks, or for both.
• Use the show ip rpf-routes command to view the routes available for RPF.
• By default, IS-IS, OSPF, and RIP routes are available both for unicast forwarding and multicast reverse-path forwarding checks.
• Example

host1(config)#router ospf 

host1(config-router)#ip route-type multicast

• There is no no version.