[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

BFD Version Support

The JUNOSe software supports both BFD Version 0 and BFD Version 1. When establishing a BFD neighbor session, the E-series router attempts to establish version 0 or version 1 sessions based on the capability of the BFD neighbor. Table 8 indicates how the routers establish sessions based on BFD version support:




 Table 8:  Determining BFD Versions

 

 

 E-series Routers Running JUNOSe 7.2.x (and later)
 E-series Routers Running Software Versions Earlier than JUNOSe 7.2.x

 

 BFD Version Support
  Version 0 and Version 1

  Version 0 Only


 E-series Routers Running JUNOSe 7.2.x (and later) and Other Routers
 
 Version 0 and Version 1

 
 Result = Version 1

 
 Result = Version 0


 E-series Routers Running Software Versions Earlier than JUNOSe 7.2.x and Other Routers
 
 Version 0 Only

 
 Result = Version 0

 
 Result = Version 0


 Other Routers
 Version 1 Only

 Result = Version 1

 No session
(version mismatch)




 NOTE: You cannot configure the JUNOSe software to send BFD Version 0 or BFD Version 1 packets. The JUNOSe software determines the BFD version through auto-negotiation.

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

		E-series Routers Running JUNOSe 7.2.x (and later)	E-series Routers Running Software Versions Earlier than JUNOSe 7.2.x
	BFD Version Support	Version 0 and Version 1	Version 0 Only
E-series Routers Running JUNOSe 7.2.x (and later) and Other Routers	Version 0 and Version 1	Result = Version 1	Result = Version 0
E-series Routers Running Software Versions Earlier than JUNOSe 7.2.x and Other Routers	Version 0 Only	Result = Version 0	Result = Version 0
Other Routers	Version 1 Only	Result = Version 1	No session (version mismatch)