JUNOSe 9.1.x IP, IPv6, and IGP Configuration Guide > Configuring IPv6 > Configuring an IPv6 License

Configuring an IPv6 License

You must configure an IPv6 license before you can use any IPv6 commands on the E-series router.

license ipv6

• Use to specify an IPv6 license.
• Purchase an IPv6 license to allow IPv6 configuration on the E-series router.
  

  NOTE: Acquire the license from Juniper Networks Customer Services and Support or your Juniper Networks sales representative.

  
  
• Example

host1(config)#license ipv6 license-value

• Use the no version to disable the license.