JUNOSe 9.1.x Broadband Access Configuration Guide > Configuring Remote Access > Configuring a B-RAS License

Configuring a B-RAS License

From Global Configuration mode, configure a B-RAS license:

host1(config)#license b-ras k3n91s6gvtj

B-RAS licenses are available in various sizes to enable subscriber access for up to one of the following maximum number of simultaneous active IP, LAC, and bridged Ethernet interfaces:

• 4000
• 8000
• 16,000
• 32,000
• 48,000
  

  NOTE: To use a B-RAS license for 16,000 or more interfaces, each of your SRP modules must have 1 gigabyte (GB) of memory.

  
  

license b-ras

• Use to specify the B-RAS license.
• The license is a unique string of up to 15 alphanumeric characters.
  

  NOTE: Acquire the license from Juniper Networks Customer Service or your Juniper Networks sales representative.

  
  
• You can purchase licenses that allow up to 2,000, 4,000, 8,000, 16,000, 32,000, or 48,000 simultaneous active IP, LAC, and bridged Ethernet interfaces.
• Example

host1(config)#license b-ras jwmR4k8D

• Use the no version to disable the license.