Monitoring Detailed Configuration Information about Specified Sessions

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x Broadband Access Configuration Guide > Monitoring L2TP and L2TP Dial-Out > Monitoring Detailed Configuration Information about Specified Sessions
Monitoring Detailed Configuration Information about Specified Sessions

Purpose

Display detailed configuration information about specified sessions.

Action

To display detailed configuration information about specified sessions:

To display L2TP session:
host1#show l2tp session 

L2TP session 1/1/1 is Up 

1 L2TP session found 
To display L2TP session details:
host1#show l2tp session detail 

L2TP session 1/1/1 is Up 

Configuration 

  Administrative state is enabled 

  SNMP traps are enabled 

Session status 

  Effective administrative state is enabled 

  State is established 

  Local session id is 25959, peer session id is 2 

Statistics packets octets discards errors 

  Data rx  7       237    1        0 

  Data tx  6       160    0        0 
Session operational configuration 

  User name is 't1.s1@local' 

  Tunneling PPP interface atm 0/0.1 

  Call type is lacIncoming 

  Call serial number is 0 

  Bearer type is none 

  Framing type is none 

  Proxy LCP was provided 

  Authentication method was chap
  Tunnel switch profile is chicago 
Meaning

Table 86: show l2tp session Output Fields

Field Name

Field Description

Configuration

Configured status of the session

Administrative state

Administrative status of the destination:

enabled—No restrictions on the operation of this session

disabled—Router terminated this session

SNMP traps

Whether or not the router sends traps to Simple Network Management Protocol (SNMP) for operational state changes

Session status

Session status of the destination

Effective administrative state

Most restrictive of the following administrative states: router, destination, tunnel, and session. This setting, rather than the administrative state of the session, determines whether the router can maintain this session or not.

State

Status of the session: idle, connecting, established, or disconnecting

Local and peer session id

Names the router uses to identify the session locally and remotely

Statistics

Information about the traffic for this session

Session operational configuration

Information received from the peer when the session was created

Table 86 lists the show l2tp session command output fields.

Related Topics

show l2tp session command

Field Name	Field Description
Configuration	Configured status of the session
Administrative state	Administrative status of the destination: enabled—No restrictions on the operation of this session disabled—Router terminated this session
SNMP traps	Whether or not the router sends traps to Simple Network Management Protocol (SNMP) for operational state changes
Session status	Session status of the destination
Effective administrative state	Most restrictive of the following administrative states: router, destination, tunnel, and session. This setting, rather than the administrative state of the session, determines whether the router can maintain this session or not.
State	Status of the session: idle, connecting, established, or disconnecting
Local and peer session id	Names the router uses to identify the session locally and remotely
Statistics	Information about the traffic for this session
Session operational configuration	Information received from the peer when the session was created

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]