JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring VPLS > Monitoring Bridging-Related Settings for VPLS

Monitoring Bridging-Related Settings for VPLS

You can use the show commands listed in Table 54 to display VPLS settings related to transparent bridging. Except for the show bridge interface vpls command, which is only for VPLS instances, you can use these commands to monitor both VPLS instances and standard bridge groups for transparent bridging.

Table 54: Commands for Monitoring VPLS Bridging Settings 

show bridge	show bridge port
show bridge groups	show bridge table
show bridge interface	show subscriber-policy
show bridge interface vpls

Related Topics

• Monitoring VPLS Configuration and Statistics for a Specific VPLS Instance
• Monitoring VPLS Configuration and Statistics for all VPLS Instances
• Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces
• Monitoring Configuration, Statistics, and Status for VPLS Core Interfaces
• Monitoring Configuration, Statistics, and Status for VPLS Ports
• Monitoring MAC Address Entries for a Specific VPLS Instance
• Monitoring Subscriber Policy Rules
• For more information about using these commands, see Monitoring Transparent Bridging in JUNOSe Link Layer Configuration Guide, Chapter 13, Configuring Transparent Bridging.