JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring VPLS > Clearing Dynamic MAC Addresses from the VPLS Forwarding Table

Clearing Dynamic MAC Addresses from the VPLS Forwarding Table

You can use the following clear commands to remove all dynamic (learned) MAC address entries or a specific dynamic MAC address entry from the forwarding table for a VPLS instance.

Tasks to clear the VPLS forwarding table are:

• Clearing All Dynamic MAC Addresses from the VPLS Forwarding Table
• Clearing a Specific Dynamic MAC Address from the VPLS Forwarding Table
• Clearing All Dynamic MAC Addresses for a Network Interface Associated with a VPLS Instance from the VPLS Forwarding Table
• Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface Associated with A VPLS Instance

Clearing All Dynamic MAC Addresses from the VPLS Forwarding Table

To clear all dynamic MAC address entries for the VPLS instance:

• Issue the clear bridge command.

host1#clear bridge vplsB

There is no no version.

Clearing a Specific Dynamic MAC Address from the VPLS Forwarding Table

To clear a specific dynamic MAC address entry for the VPLS instance:

• Issue the clear bridge address command.

host1#clear bridge vplsB address 0090.1a40.9992

There is no no version.

Clearing All Dynamic MAC Addresses for a Network Interface Associated with a VPLS Instance from the VPLS Forwarding Table

To clear all dynamic MAC address entries for a network interface associated with a VPLS instance:

• Issue the clear bridge interface command.

host1#clear bridge interface atm 3/3.2

There is no no version.

Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface Associated with A VPLS Instance

To clear all dynamic MAC address entries for the VPLS virtual core interface associated with a VPLS instance:

• Issue the clear bridge interface vpls command.

host1#clear bridge interface vpls vplsA

There is no no version.

Related Topics

• clear bridge command
• clear bridge address command
• clear bridge interface command
• clear bridge interface vpls command