Monitoring VPLS-Specific Settings

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]

JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring VPLS > Monitoring VPLS-Specific Settings
Monitoring VPLS-Specific Settings

Purpose

Display configuration and status information for VPLS connections configured on the router.

Action

To display detailed information about all VPLS instances configured on the router:
host1#show vpls connections details
  BridgeGroup: vpls1(vpls)
        Bridge Mode:            default
        Aging Time:             300 secs 
        Learning:               Enabled
        Max Learn:              Unlimited
        Link Status Snmp Traps: Disabled
        Subscriber Policy:      default Subscriber
        Port Count:             2
        Interface Count:        1
        Transport Virtual Rtr:  pe1
          Route Distinguisher:    1.1.1.1:10
        SiteName:               westford
        SiteId:                 1
        SiteRange:              10
        VPLS Route Targets
          Route Target: RT:100:1 (both)
        Flood Next Hop: Index 1048577
          MPLS next-hop: 20, label 46, resolved by MPLS next-hop 19
            MPLS next-hop: 19, resolved by MPLS next-hop 17, peer 2.2.2.2
              MPLS next-hop: 17, label 82 on ATM2/0.10, nbr 10.10.10.2
        Interface            Port       Status   
-------------------------   ------   ------------
FastEthernet3/1             1        Up          
vpls vpls1                  2        Up          
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
Site   State     Remote PE     In-label  Out-label  MPLS NH Idx  Up-down Time
-----  -----  ---------------  --------  ---------  -----------  ------------
2      UP     2.2.2.2          17        46         20           00:02:56    
  BridgeGroup: vpls2(vpls)
        Bridge Mode:            default
        Aging Time:             300 secs 
        Learning:               Enabled
        Max Learn:              Unlimited
        Link Status Snmp Traps: Disabled
        Subscriber Policy:      default Subscriber
        Port Count:             2
        Interface Count:        1
        Transport Virtual Rtr:  pe1
          Route Distinguisher:    1.1.1.1:10
        SiteName:               westford
        SiteId:                 1
        SiteRange:              20
        VPLS Route Targets
          Route Target: RT:100:2 (both)
        Flood Next Hop: Index 1048578
          MPLS next-hop: 21, label 56, resolved by MPLS next-hop 19
            MPLS next-hop: 19, resolved by MPLS next-hop 17, peer 2.2.2.2
              MPLS next-hop: 17, label 82 on ATM2/0.10, nbr 10.10.10.2
        Interface            Port       Status   
-------------------------   ------   ------------
ATM2/0.12                   1        Up          
vpls vpls2                  2        Up          
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
Site   State     Remote PE     In-label  Out-label  MPLS NH Idx  Up-down Time
-----  -----  ---------------  --------  ---------  -----------  ------------
2      UP     2.2.2.2          27        56         21           00:02:56    
Meaning

Table 69 lists the show vpls connections command output fields.

Table 69: show cpls connections Output Fields

Field Name

Field Description

BridgeGroup

Name of the VPLS instance for which information is displayed

Bridge Mode

Bridging capability currently enabled; for a VPLS instance, this field always displays default

Aging Time

Length of time, in seconds, that a MAC address entry can remain in the forwarding table before expiring

Learning

Whether acquisition of dynamically learned MAC addresses is enabled or disabled

Max Learn

Maximum number of dynamic MAC addresses that the VPLS instance can learn

Link Status Snmp Traps

Whether SNMP link status processing is enabled or disabled

Subscriber Policy

Name of the subscriber policy currently in effect

Port Count

Number of ports currently configured for the VPLS instance, including network interfaces and the VPLS virtual core interface

Interface Count

Number of network interfaces currently configured for the VPLS instance

Transport Virtual Rtr

Name of the transport virtual router configured for the VPLS instance

Route Distinguisher

Unique route distinguisher configured for the VPLS instance

SiteName

Site name configured for the VPLS instance

SiteId

Numerical site identifier configured for the VPLS instance

SiteRange

Maximum number of sites that can participate in the VPLS domain associated with the VPLS instance

VPLS Route Targets

Extended community identifiers, also known as route targets, for each VPLS instance configured on the router

Flood Next Hop

Index number of the MPLS next hop to which the router floods packets with unknown destination addresses. For more information about displaying MPLS next hops and any available next-hop statistics, see the show mpls next-hop command description in Chapter 2, Configuring MPLS.

Interface

Type and specifier of the network interfaces and VPLS virtual core interface associated with the VPLS instance; vpls vplsName in this field identifies the VPLS virtual core interface

Port

Port number of the module on which the network interface or VPLS virtual core interface resides

Status

Operational status of the physical interface: Up, Down, LowerLayerDown, NotPresent

Connections status code

Possible status codes for the VPLS connection that appear in the State field

Site

Remote site identifier

State

Status of the connection with the remote VPLS instance; possible values for this field appear in the Connections status code legend in the command display

Remote PE

IP address of the remote VPLS edge (VE) router, which is analogous to the remote provider edge (PE) router in a BGP/MPLS VPN configuration

In-label

Incoming MPLS label from the remote site

Out-label

Outgoing MPLS label used to reach the remote site

MPLS NH Idx

MPLS next-hop index number that corresponds to the outgoing MPLS label

Up-down Time

Time since the last state change for this VPLS connection

Related Topics

show vpls connections command

Field Name	Field Description
BridgeGroup	Name of the VPLS instance for which information is displayed
Bridge Mode	Bridging capability currently enabled; for a VPLS instance, this field always displays default
Aging Time	Length of time, in seconds, that a MAC address entry can remain in the forwarding table before expiring
Learning	Whether acquisition of dynamically learned MAC addresses is enabled or disabled
Max Learn	Maximum number of dynamic MAC addresses that the VPLS instance can learn
Link Status Snmp Traps	Whether SNMP link status processing is enabled or disabled
Subscriber Policy	Name of the subscriber policy currently in effect
Port Count	Number of ports currently configured for the VPLS instance, including network interfaces and the VPLS virtual core interface
Interface Count	Number of network interfaces currently configured for the VPLS instance
Transport Virtual Rtr	Name of the transport virtual router configured for the VPLS instance
Route Distinguisher	Unique route distinguisher configured for the VPLS instance
SiteName	Site name configured for the VPLS instance
SiteId	Numerical site identifier configured for the VPLS instance
SiteRange	Maximum number of sites that can participate in the VPLS domain associated with the VPLS instance
VPLS Route Targets	Extended community identifiers, also known as route targets, for each VPLS instance configured on the router
Flood Next Hop	Index number of the MPLS next hop to which the router floods packets with unknown destination addresses. For more information about displaying MPLS next hops and any available next-hop statistics, see the show mpls next-hop command description in Chapter 2, Configuring MPLS.
Interface	Type and specifier of the network interfaces and VPLS virtual core interface associated with the VPLS instance; vpls vplsName in this field identifies the VPLS virtual core interface
Port	Port number of the module on which the network interface or VPLS virtual core interface resides
Status	Operational status of the physical interface: Up, Down, LowerLayerDown, NotPresent
Connections status code	Possible status codes for the VPLS connection that appear in the State field
Site	Remote site identifier
State	Status of the connection with the remote VPLS instance; possible values for this field appear in the Connections status code legend in the command display
Remote PE	IP address of the remote VPLS edge (VE) router, which is analogous to the remote provider edge (PE) router in a BGP/MPLS VPN configuration
In-label	Incoming MPLS label from the remote site
Out-label	Outgoing MPLS label used to reach the remote site
MPLS NH Idx	MPLS next-hop index number that corresponds to the outgoing MPLS label
Up-down Time	Time since the last state change for this VPLS connection

[Contents] [Prev] [Next] [Index] [Report an Error] [No Frames]