JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring VPLS > Monitoring BGP-Related Settings for VPLS

Monitoring BGP-Related Settings for VPLS

You can use the show ip bgp commands listed in Table 64 to display BGP-related settings for VPLS instances in the L2VPN address family or in the VPLS address family.

Table 64: Commands for Monitoring VPLS BGP Settings 

show ip bgp	show ip bgp neighbors paths
show ip bgp advertised-routes	show ip bgp neighbors received-routes
show ip bgp community	show ip bgp neighbors routes
show ip bgp community-list	show ip bgp network
show ip bgp dampened-paths	show ip bgp next-hops
show ip bgp filter-list	show ip bgp paths
show ip bgp flap-statistics	show ip bgp peer-group
show ip bgp l2vpn	show ip bgp quote-regexp
show ip bgp l2vpn vpls	show ip bgp regexp
show ip bgp neighbors	show ip bgp summary
show ip bgp neighbors dampened-routes	–

Related Topics

• Monitoring Layer 2 NLRI for VPLS Instances
• Monitoring BGP Next Hops for VPLS
• For more information about using these commands, see Chapter 1, Configuring BGP Routing and Chapter 3, Configuring BGP-MPLS Applications.