JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring Layer 2 Services over MPLS > Monitoring ATM Cross-Connects for Layer 2 Services over MPLS

Monitoring ATM Cross-Connects for Layer 2 Services over MPLS

Purpose

Display all ATM cross-connects (passthrough connections between local subinterfaces).

Action

To display ATM cross-connects:

host1#show mpls cross-connects atm

             Cate Peak

VC-ID  Encap gory Rate Interface  VPI VCI Status

------ ----- ---- ---- ---------- --- --- ------

600001 AAL5  UBR     0 ATM6/0.101   0 101 Up

                       ATM6/2.101   0 101 Up

600002 AAL5  UBR     0 ATM6/0.102   0 102 Up

                       ATM6/2.102   0 102 Up

2 local connection(s) found

Meaning    

Table 41 lists the show mpls cross-connects atm command output fields

Table 41: show mpls cross-connects atm Output Fields 

Field Name	Field Description
VC-ID	VC ID number of the connection
Encap	Administered encapsulation method based on what was configured with the atm pvc command
Category	Configured service category
Peak Rate	Send and receive peak rate, in Kbps
Interface	Specifier and status of the first subinterface that makes up the local cross-connect
VPI	Virtual path identifier of the first subinterface
VCI	Virtual channel identifier of the first subinterface
Status	Current state of the connection

Related Topics

• show mpls cross-connects atm command