JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring L2VPNs > Clearing BGP Attributes for L2VPNs

Clearing BGP Attributes for L2VPNs

You can use the following clear ip bgp commands to remove specific BGP attributes for the L2VPN address family, and in one case, for the VPWS address family.

Clearing BGP Reachability Information for the L2VPN Address Family

To clear BGP reachability information for the L2VPN address family:

• Issue the clear ip bgp command.

host1#clear ip bgp l2vpn soft in

Use the soft in keywords to trigger inbound soft reconfiguration. There is no no version.

Clearing BGP Route Flap Dampening Information for the L2VPN Address Family

To clear route flap dampening information for the L2VPN address family:

• Issue the clear ip bgp dampening command.

host1#clear ip bgp l2vpn dampening

There is no no version.

Clearing BGP Route Flap Dampening Information for the VPWS Address Family

To clear route flap dampening information for the VPWS address family associated with the specified L2VPN (VPWS) instance:

• Issue the clear ip bgp dampening command.

host1#clear ip bgp vpws l2vpnA dampening

There is no no version.

Clearing the Wait for the End-of-RIB Marker for the L2VPN Address Family

To clear the wait for receiving an End-of-RIB marker from the peer for the L2VPN address family:

• Issue the clear ip bgp wait-end-of-rib command.

host1#clear ip bgp l2vpn wait-end-of-rib

Related Topics

• clear ip bgp command
• clear ip bgp dampening command
• clear ip bgp wait-end-of-rib command
• Chapter 1, Configuring BGP Routing