JUNOSe 9.1.x BGP and MPLS Configuration Guide > Monitoring L2VPNs

Monitoring L2VPNs

This chapter describes the commands you can use to monitor and troubleshoot Layer 2 Virtual Private Networks (L2VPNs) on E-series routers.

This chapter contains the following sections:

• Clearing BGP Attributes for L2VPNs
• Monitoring BGP-Related Settings for L2VPNs
• Monitoring BGP Next Hops for L2VPNs
• Monitoring L2VPN Connections
• Monitoring L2VPN Instances
• Monitoring L2VPN Interfaces
• Monitoring MPLS Forwarding State for L2VPN (VPWS) Instances
  

  NOTE: The E120 router and E320 router output for monitor and show commands is identical to output from other E-series routers, except that the E120 and E320 router output also includes information about the adapter identifier in the interface specifier (slot/adapter/port).