JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > tunnel mpls diff-serv phb-id

tunnel mpls diff-serv phb-id

Description: 

Specifies the PHB supported by a signaled tunnel.

For E-LSPs, this command also maps the PHB to the specified EXP bits bitValue. You can repeat the command for up to eight PHB mappings.

For L-LSPs, the exp-bits keyword is not used. If you repeat the command, the most recent command overwrites the previous command.

The no version removes the mapping association.

Syntax: 

tunnel mpls diff-serv phb-id { private privateId | standard standardId } [ exp-bits expBits ]

no tunnel mpls diff-serv phb-id { private privateId | standard standardId }

• privateId—Number, in the range 0–4095, designating the private PHB identifier
• standardId—Number, in the range 0–63, designating the standard identifier using the DSCP bits
• expBits—Number, in the range 0–7, designating the EXP bits

Mode(s): 

Interface Configuration, Tunnel Profile Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.