JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > trigger delay

trigger delay

Description: 

Specifies the time duration used to determine when a SONET/SDH defect at the line or section layer becomes an alarm. The no version restores the default setting, 2500 milliseconds.

Syntax: 

trigger delay msec delayTime

no trigger delay

• delayTime—Time in the range 0–2500 milliseconds

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.