JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > t1 fdl

t1 fdl

Description: 

Specifies the FDL standard used by a specific T1 channel on the CT3 interface. The no version restores the default, none.

Syntax: 

t1 channel fdl { ansi | att | all | none }

no t1 channel fdl [ ansi | att | all ]

• channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
• ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
• att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange support
• all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange support
• none—Removes the current FDL mode settings

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.