JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > threshold-test

threshold-test

Description: 

Defines the values for an SNMP threshold-test trigger. The no version deletes the threshold-test values for this trigger or removes either the threshold startup condition or event binding.

Syntax: 

threshold-test startup { falling | rising | risingorfalling }

threshold-test absolute-value rising risingValue falling fallingValue

threshold-test event { rising eventOwner eventName | falling eventOwner eventName |
delta-rising eventOwner eventName | delta-falling eventOwner eventName }

threshold-test delta-value rising risingValue falling fallingValue

no threshold-test [ startup | absolute-value | delta-value | event rising | event falling |
event delta-rising | event delta-falling ]

• startup—Startup threshold condition that you predict the sample to follow

• falling—Specifies that the sample values are expected to be falling values
• rising—Specifies that the sample values are expected to be rising values
• risingorfalling—Specifies that the sample values might be either rising values or falling values

• absolute-value—Specifies that the trigger is monitoring absolute threshold values
• risingValue—Rising threshold value for the trigger, in the range -2147483648–2147483648
• fallingValue—Falling threshold value for the trigger, in the range -2147483648–2147483648
• event—Binds an event owner and name to specific events on which the threshold-test might trigger: rising values within a sample, falling values within a sample, rising values between samples, or falling values between samples
• eventOwner—Event owner name; string of up to 32 alphanumeric characters
• eventName—Event name; string of up to 32 alphanumeric characters
• delta-value—Specifies that the trigger is monitoring the difference (delta)( between sample values

Mode(s): 

SNMP Trigger Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.