JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands
> telnet listen
telnet listen
Description:
Sets the Telnet daemon to listen in a virtual router other than the default. The no version deletes the Telnet daemon.
Syntax:
telnet listen [ port portValue ]
no telnet listen
- portValue—TCP port on which the Telnet daemon listens; if not specified, uses the default, port 23
Mode(s):
Global Configuration
Release Information:
Command introduced before JUNOSe Release 7.1.0.