JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > write core

write core

Description: 

Reboots the active SRP module, the standby SRP module, or the module in a specified slot, and writes the core dump to a file. There is no no version.

Syntax: 

write core [ standby-srp | slot slotNumber ] [ force ] [ reason reasonText ]

• standby-srp—Specifies the standby SRP module
• slotNumber—Number of a selected slot in the router; for ERX-7xx models, a number in the range 0–6; for ERX-14xx models, a number in the range 0–13; for the ERX-310 router, a number in the range 0–2; for the E120 router, a number in the range 0–5; for the E320 router, a number in the range 0–16
• force—Prompts for confirmation to reboot when the router is in certain states, such as during the synchronization of SRP modules, that can lead to a loss of configuration data or an NVS corruption
  

  NOTE: The force keyword is available when you specify a slot only if that slot is an SRP module slot.

  
  
• reasonText—Alphanumeric text string (1–255 characters long) that explains the request for a core dump and logs it in the reboot

Mode(s): 

Privileged Exec

Release Information: 

Command introduced in JUNOSe Release 7.3.0.