JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > t1 snmp trap link-status

t1 snmp trap link-status

Description: 

Enables processing of SNMP link status information about a T1 or fractional T1 channel on a CT3 interface. The no version disables the processing of SNMP link status information.

Syntax: 

[ no ] t1 channel [ /subchannel ] snmp trap link-status

• channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
• subchannel—Specifies the FT1 subchannel on a T1 interface, in the range 1–24

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.