JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > vlan advisory-tx-speed

vlan advisory-tx-speed

Description: 

Sets an advisory connect (Tx) speed that the LAC sends in the Tx connect speed to the LNS. The no version restores the default behavior, in which the Tx speed is not sent to the LNS.

Syntax: 

vlan advisory-tx-speed speed

no vlan advisory-rx-speed

• speed—Speed in the range 0–2147483647 kbps; 0 indicates no advisory speed setting

Mode(s): 

Profile Configuration, Subinterface Configuration

Release Information: 

Command introduced in JUNOSe Release 7.2.0.