JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > t1 remote-loopback

t1 remote-loopback

Description: 

Enables the acceptance of loopback commands issued from a remote router. The no version restores the default value, which is to reject loopback commands issued from a remote router.

Syntax: 

[ no ] t1 channel remote-loopback

• channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.