JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > undebug ip mbgp

undebug ip mbgp

Description: 

Turns off the display of information previously enabled with the debug ip mbgp command. There is no no version.

Syntax: 

undebug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ]
[ bgpLog ] [ router routerName ] [ filtering-router filteringRouterName ]
[ accessClassName ] [ route-map mapName ]

• in—Displays information for inbound events
• out—Displays information for outbound events
• peerAddress—IP address of BGP peer for which information is displayed
• peerAddressMask—Network mask of BGP peer for which information is displayed
• bgpLog—BGP log of interest; one of the following options:

• dampening—BGP dampening event; route is suppressed or no longer suppressed by route-flap dampening
• events—BGP finite state machine events and transitions
• keepalives—BGP keepalive message events
• next-hops—BGP next hop events
• updates—BGP routing table update events

• routerName—Name of the virtual router that owns the BGP router for which information is being displayed
• filteringRouterName—Name of the virtual router that owns the access class and route map parameters
• accessClassName—Name of an access list to filter output
• mapName—Name of a route map to filter output

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.