JUNOSe 9.1.x Command Reference Guide N to Z > T-U-V-W-X-Y-Z Commands > tunnel-server

tunnel-server

Description: 

Specifies the location of a dedicated or shared tunnel-server port on a module and accesses Tunnel Server Configuration mode, which enables you to provision the maximum number of tunnel-service interfaces to be used on the tunnel-server port. The default version restores the default configuration. On dedicated tunnel-server ports, the default configuration is the maximum number of tunnel-service interfaces that the tunnel-service module supports. On shared tunnel-server ports, the default configuration is zero tunnel-service interfaces provisioned. The no version unprovisions the tunnel-server port by reducing the number of provisioned tunnel-service interfaces to zero.

Syntax: 

[ no ] tunnel-server interfaceSpecifier

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide; port number specified must have the tunnel-server port assigned to it

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions