JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > svlan id

svlan id

Description: 

Assigns an S-VLAN ID and a VLAN ID to a VLAN subinterface, or, with the use of the any keyword, create an S-VLAN tunnel. There is no no version.

Syntax: 

svlan id s-vlanIdValue { vlanIdValue | any } [ mac-address macAddress ]

• s-vlanIdValue—S-VLAN ID number in the range 0–4095, which is unique within the Ethernet interface
• vlanIdValue—VLAN ID number in the range 0–4095, which is unique within the Ethernet interface
• any—Tunnels traffic from VLANs configured with the specified S-VLAN ID and any VLAN ID to the same destination across an MPLS network
• macAddress—MAC address of the interface; when you do not specify a unique MAC address, the S-VLAN uses the MAC address of the Ethernet interface

Mode(s): 

Interface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Configuring S-VLAN Tunnels for Layer 2 Services