JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > svlan ethertype

svlan ethertype

Description: 

In Interface Configuration mode, specifies the Ethertype of an S-VLAN. The no version restores the default value, 9100.

In Profile Configuration mode, specifies the available Ethertypes that the packet must use to create a dynamic VLAN subinterface. The no version restores the default value, autoconfig.

Syntax: 

svlan ethertype ethertypeValue

no svlan ethertype

• ethertypeValue—One of the following Ethertype values:

• 8100—Specifies Ethertype value 0x8100, as defined in IEEE Standard 802.1q
• 88a8—Specifies Ethertype value 0x88a8, as defined in draft IEEE Standard 802.1ad
• 9100—Specifies Ethertype value 0x9100, which is the default for Interface Configuration mode
• autoconfig—Specifies in a VLAN profile that the packet can use any Ethertype to create a dynamic VLAN subinterface; this is the default for Profile Configuration mode

Mode(s): 

Interface Configuration, Profile Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
88a8 keyword added in JUNOSe Release 7.1.0.

    Related Topics    

• Configuring S-VLAN Tunnels for Layer 2 Services