JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > subscriber

subscriber

Description: 

Configures a local subscriber (when one cannot be obtained externally, as in PPP) on the E-series router to support authentication and configuration from the RADIUS server. The no version negates the command.

Syntax: 

subscriber { bridgedEthernet | ip } { user | user-prefix } userName
domain domainName [ { password | password-prefix } password ] [ no-authenticate ]

no subscriber { bridgedEthernet | ip }

• bridgedEthernet—Specifies bridgedEthernet as the upper interface type
• ip—Specifies IP as the upper interface type
• user—Employs the username as specified
• user-prefix—Appends the interface physical location to the username
• userName—RADIUS username
• domainName—Domain name
• password—Employs the password as specified
• password-prefix—Appends the interface physical location to the password
• password—RADIUS password
• no-authenticate—Disables authentication

Mode(s): 

Interface Configuration, Subinterface Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.