JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > snmp-server enable traps

snmp-server enable traps

Description: 

Enables and configures global SNMP trap generation. The no version disables SNMP trap generation.

Syntax: 

[ no ] snmp-server enable traps [ trapCategory | snmp authentication ]
[ trapfilters trapFilter ]

• trapCategory—SNMP trap category

• addrPool—Local address pool traps
• atmPing—E-series router proprietary ATM ping traps
• bfdmib—BFD MIB traps
• bgp—BGP state change traps
• bulkstats—Bulkstats file full and nearly full traps
• cliSecurityAlert—Security alerts traps
• dhcp—DHCP traps
• dismanEvent—Distributed management (disman) event traps
• dosProtectionPlatform—DoS protection platform traps
• dvmrp—DVMRP traps
• dvmrpProp—E-series router proprietary DVMRP traps
• environment—Power, temperature, fan, and memory utilization traps
• fileXfer—File transfer status change traps
• haRedundancy—High availability and redundancy traps
• inventory—Router inventory and status traps
• ip—Internet Protocol traps
• ldp—LDP traps
• link—SNMP linkUp and linkDown traps
• log—System log capacity traps
• mobileIpv4—Mobile IPv4 traps
• mplste—Mplste traps
• mrouter—Mrouter traps
• ntp—E-series router proprietary traps
• ospf—OSPF traps
• packetMirror—Secure packet mirroring traps; visible only if packet mirroring is enabled
• pim—PIM traps
• ping—Ping operation traps (in disman remops MIB)
• radius—RADIUS authentication and authorization servers
• routeTable—Maximum route limit and warning threshold traps; when this trap is generated, the actual value of the exceeded warning threshold is displayed
• sonet—SONET traps
• snmp—SNMP coldStart, warmStart, link, and authenticationFailure traps
• traceroute—Traceroute operation traps (in disman remops MIB)
• vrrp—VRRP traps

• snmp—Specifies the SNMP coldStart, warmStart, and authenticationFailure traps
• authentication—Specifies the SNMP authenticationFailure trap
• trapFilter—Minimum severity level for filtering traps

• emergency—Severity level 0
• alert—Severity level 1
• critical—Severity level 2
• error—Severity level 3
• warning—Severity level 4
• notice—Severity level 5
• informational—Severity level 6
• debug—Severity level 7

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.

    Related Topics    

• Monitoring SNMP Secure Packet Mirroring Traps