JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > slot enable

slot enable

Description: 

Enables the module installed in the specified slot. You cannot use this command on a slot that contains a primary SRP module. There is no no version.

Syntax: 

slot enable slotNum [ subsystem ]

• slotNum—Number of the selected slot in the router; for ERX-7xx models, a number in the range 0–6; for ERX-14xx models, a number in the range 0–13; for the ERX-310 router, a number in the range 1–2; for the E120 router, a number in the range 0–5; for the E320 router, a number in the range 0–16
• subsystem—Type of subsystem on the E320 router; use when the specified slotNumber is a slot that contains an SRP module

• srp—Indicates the SC on one or both SRP modules; specify this keyword to enable only the portion of the SC on the individual SRP module
• fabric—Indicates the portion of the switch fabric on the SRP modules; specify this keyword to enable only an individual fabric slice

Mode(s): 

Global Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.