JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show tunnel-server

show tunnel-server

Description: 

Displays status and configuration information for dedicated and shared tunnel-server ports configured on the router. You can display information for a specific tunnel-server port or for all tunnel-server ports.

Syntax: 

show tunnel-server [ config ] [ interfaceSpecifier ] [ filter ]

• config—Displays configuration information about available and provisioned tunnel-service interfaces on each port, and indicates whether modules that support dedicated or shared tunnel-server ports are currently installed in the router
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide; port number specified must have the dedicated or shared tunnel-server port assigned to it
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.