show tcp statistics
Displays all TCP statistics or only IPv4 or IPv6 TCP statistics.
 |
NOTE: Order is important when you enter options for this command. Even though you can skip options, you cannot enter options out of sequence. |
show [ ip | ipv6 ] tcp statistics [ vrf vrfName ] [ brief | detailed | diagnostic ] [ delta ]
[ local-address localAddress ] [ local-port localPort ]
[ remote-address remoteAddress ] [ remote-port remotePort ] [ filter ]
- ip—Displays only IPv4 TCP statistics
- ipv6—Displays only IPv6 TCP statistics
- vrfName—Name of the VRF
- brief—Displays a brief summary of each TCP connection
- detailed—Displays detailed statistics for each TCP connection
- diagnostic—Displays diagnostic information collected on all TCP connections, including per-connection logging information
- delta—Displays baselined statistics
- localAddress—Local IPv4 or IPv6 address for which session statistics are displayed
- localPort—Local port number for which session statistics are displayed
- remoteAddress—Remote IP v4 or IPv6 address for which session statistics are displayed
- remotePort—Remote port number for which session statistics are displayed
- filter—See Filtering show Commands in About This Guide
Privileged Exec, User Exec
Command introduced before JUNOSe Release 7.1.0.
ip keyword made optional in JUNOSe Release 7.2.0.
ipv6 keyword added in JUNOSe Release 7.2.0.