JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > set ipv6 next-hop

set ipv6 next-hop

Description: 

Indicates where to send packets that pass a match clause of a route map for IPv6 policy routing. The no version removes the set clause from a route map.

Syntax: 

[ no ] set ipv6 next-hop ipv6Address [ localAddress ]

• ipv6Address—IPv6 address of next hop to which you want to send packets; does not need to be an adjacent router
• localAddress—IP address of the specific interface

Mode(s): 

Route Map Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.