JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > set ip source-prefix

set ip source-prefix

Description: 

Specifies a source address range that will be inserted into a specific interface and the action to take with the range. The no version removes the source address range from the route map.

Syntax: 

[ no ] set ip source-prefix ipAddress ipMask { deny | primary }

• ipAddress—IP address for the range
• ipMask—IP address mask for the range
• deny—Drops the addresses that appear in the source address range
• primary—Associates the source prefix with the primary IP interface

Mode(s): 

Route Map Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.