JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show qos shared-shaper

show qos shared-shaper

Description: 

Displays information about shared shapers for an interface, L2TP session, or tunnel-service interface.

Syntax: 

To display information about shared shapers for a specified interface:

show qos shared-shaper interface interfaceType interfaceSpecifier
[ atmVpi | s-vlanIdValue ] [ summary ] [ explicit ] [ brief | full ] [ filter ]

To display information about shared shapers on an L2TP session:

show qos shared-shaper lt2p session sessionName
[ summary ] [ explicit ] [ brief | full ] [ filter ]

To display information about shared shapers on a tunnel-service interface:

show qos shared-shaper tunnel-server interfaceType
[ summary ] [ explicit ] [ brief | full ] [ filter ]

• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• atmVpi—Virtual path identifier of this PVC; number in the range 0–255
• s-vlanIdValue—S-VLAN ID number in the range 0–4095
• sessionName —Name of the L2TP session
• summary—Displays summary of shared shapers stacked above the specified interface
• explicit—Displays shared shapers for the specified interface rather than those stacked above the interface
• brief—Displays information in condensed format
• full—Displays information in expanded format
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
atmVpi and s-vlanIdValue variables added in JUNOSe Release 7.1.0.

    Related Topics    

• Monitoring Shared Shapers