JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show pppoe interface

show pppoe interface

Description: 

Displays information about the PPPoE interface you specify. Use the summary keyword to display information for all configured PPPoE interfaces.

Syntax: 

show pppoe interface [ interfaceType interfaceSpecifier ] [ delta ] [ filter ]

show pppoe interface [ full ] [ summary ]

• interfaceType—One of the following interface types listed in Interface Types and Specifiers in About This Guide:

• atm
• fastEthernet
• gigabitEthernet
• lag
• serial—PPPoE is not currently supported on serial interfaces
• tenGigabitEthernet

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• delta—Displays baselined statistics
• filter—See Filtering show Commands in About This Guide
• full—Displays configuration, status, and statistics information
• summary—Displays administrative and operational status of all configured PPPoE interfaces

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.