JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show mpls fast-reroute database

show mpls fast-reroute database

Description: 

Displays information about the backup state of protected primary tunnels.

Syntax: 

show mpls [ traffic-eng ] fast-reroute database [ ipAddress ]
[ name tunnelName ] [ interface interfaceType interfaceSpecifier ]
[ status { all | desired | establishing | established | active | unknown } ]
[ count-only ] [ filter ]

• traffic-eng—Specifies optional keyword for compatibility with non–E-series implementations
• ipAddress—Address of the endpoint for the primary LSP; meaningful only for the tunnel ingress node
• tunnelName—Name of the primary LSP; meaningful only for the tunnel ingress node
• interfaceType—Interface type; see Interface Types and Specifiers in About This Guide
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• status—Displays only entries with the specified status:

• all—Displays all entries regardless of backup protection status
• desired—Displays entries where backup protection is desired
• establishing—Displays entries where backup protection is being established
• established—Displays entries where backup protection is established
• active—Displays entries where backup protection is active
• unknown—Displays entries where status of backup protection is unknown

• count-only—Displays count of entries matching command specification
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.