JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show log data

show log data

Description: 

Displays the system log.

Syntax: 

show log data [ nv-file | category eventCategory ]
[ severity { severityValue | severityNumber } ] [ delta ] [ filter ]

• nv-file—Displays the nv-file log
• eventCategory—Log category to display; refer to the CLI online help for available options
• severity—Minimum severity of the log messages displayed; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:

• emergency or 0—System unusable
• alert or 1—Immediate action needed
• critical or 2—Critical condition exists
• error or 3—Error condition
• warning or 4—Warning condition
• notice or 5—Normal but significant condition
• info or 6—Informational message
• debug or 7—Debug message

• delta—Limits the display to events that occurred after the baseline
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.