JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show l2tp dial-out target

show l2tp dial-out target

Description: 

Displays configured dial-out targets within the current virtual router context.

Syntax: 

show l2tp dial-out target [ targetIpAddress targetIpAddressMask | allVirtualRouters ]
[ detail ] [ state operState ] [ filter ]

To display summary information:

show l2tp dial-out target summary [ allVirtualRouters ] [ filter ]

• targetIpAddress—Trigger IP address for the target that you want to display
• targetIpAddressMask—Mask for the trigger IP address
• allVirtualRouters—Displays dial-out information for all virtual routers
• detail—Displays configuration, state, and statistics
• operState—One of the following operational states:

• down
• inService
• inhibited

• filter—See Filtering show Commands in About This Guide
• summary—Displays aggregate counts for targets in each of the possible operational and administrative states

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.