JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ipv6 tunnel-route

show ipv6 tunnel-route

Description: 

Displays current state of the IPv6 tunnel routing table.

Syntax: 

show ipv6 tunnel-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ]
[ all ] [ protocol ] [ filter ]

• vrfName—Name of the VRF
• ipv6Address—IPv6 address
• ipv6Prefix—Prefix of prefix list entry; in the format IPv6baseaddress/length; for example, 1::1/32
• detail—Displays detailed information about the specific route
• all—Displays all routes in the IPv6 tunnel routing table inserted from all protocols, not just the best routes
• protocol—The following protocols for which you want to display the best route or all routes in the tunnel routing table; no routes are displayed if routes for the specified protocol are not present in the tunnel routing table
  

  NOTE: Other protocol options are available in the CLI, but they are not applicable to the tunnel routing table.

  
  

• bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table

• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced in JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.