JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ipv6 pim sparse-mode unicast-route

show ipv6 pim sparse-mode unicast-route

Description: 

Displays the IPv6 unicast routes that PIM sparse mode is using.

Syntax: 

show ipv6 pim sparse-mode unicast-route [ routeAddress routeMask | ipv6Prefix ]
[ count ] [ filter ]

• routeAddress—IPv6 address associated with a unicast route
• routeMask—Network mask associated with a unicast route
• ipv6Prefix—Prefix in the format IPv6BaseAddress/length; for example, 1::1/32
• count—Shows the number of unicast routes that PIM sparse mode is using
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.