JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ipsec tunnel

show ipsec tunnel

Description: 

Displays information about tunnels that are configured on a specific virtual router.

Syntax: 

show ipsec tunnel [ tunnelName | [ virtual-router vrName ] ip ipAddress ]
[ state { adminState | operStatus } ] [ filter ] [ detail ] [ delta ]

To display summary information:

show ipsec tunnel summary [ filter ]

• tunnelName—Name of tunnel
• vrName—Name of virtual router on which tunnels are configured
• ipAddress—IP address used by tunnels
• state—Restricts display to tunnels in one of the following states:

• adminState—Administrative state of enabled or disabled
• operStatus—Operational state of up, down, lower-down, or not-present

• filter—See Filtering show Commands in About This Guide
• detail—Displays configuration and statistics of tunnels
• delta—Displays baselined statistics
• summary—Displays a summary of all tunnels configured on the router

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.