JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ip route

show ip route

Description: 

Displays current state of the routing table.

Syntax: 

show ip route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ] [ filter ]

To display summary information:

show ip route summary [ vrf vrfName ] [ filter ]

• vrfName—Displays the contents of the IP routing table associated with a VRF
• destination—Specifies the IP address or domain name of the host to show
• ipMask—IP mask of the specific address to show
• detail—Displays detailed information about the specific prefix; currently shows the tag added by means of the ip route command
• all—Displays all routes in the routing table inserted from all protocols (not just the best routes that are used for forwarding)
• protocol—One of the following protocols for which you want to display the best routes in the routing table; no routes are displayed if routes for the specified protocol are not present in the routing table

• access—Displays the best access-server routes (BGP) in the routing table
• access-internal—Displays the best access-internal routes in the routing table
• bgp—Displays the best BGP routes in the routing table
• bgp-tunnel—Displays the best BGP tunnel routes in the routing table
• dvmrp—Displays the best DVMRP routes in the routing table
• isis—Displays the best IS-IS routes in the routing table
• ldp—Displays the best LDP tunnel routes in the routing table
• local—Displays the best locally connected routes in the routing table
• mbgp—Displays the best MBGP routes in the routing table
• ospf—Displays the best OSPF routes owned by in the routing table
• other—Displays the best internal control routes in the routing table
• rip—Displays the best RIP routes in the routing table
• rsvp—Displays the best RSVP tunnel routes in the routing table
• static—Displays the best static routes added by network management to the routing table
• static-rpf—Displays the best static RPF routes added by network management to the routing table

• summary—Displays summary counters for all routes in the IP routing table
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.