JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show ip bgp neighbors received prefix-filter

show ip bgp neighbors received prefix-filter

Description: 

Displays prefix-list outbound route filters received from the neighbor.

Syntax: 

show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
neighbors { ipAddress | ipv6Address } received prefix-filter [ filter ]

• ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default option
• ipv4 multicast—Specifies the IPv4 multicast address family and routing table
• vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and forwarding instances
• vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN routing and forwarding instance with the name vrfName
• ipAddress—IP address of a neighbor whose routes the router has learned
• ipv6Address—IPv6 address of a neighbor whose routes the router has learned
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.