JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show dvmrp tunnel

show dvmrp tunnel

Description: 

Displays information about DVMRP tunnels.

Syntax: 

show dvmrp tunnel [ detail ] [ state tunnelStatus ] [ tunnelName |
[ virtual-router vrName ] ip ipAddress [ tunnelName ] ] [ filter ]

To display summary information:

show dvmrp tunnel summary [ filter ]

• detail—Shows detailed tunnel information about DVMRP tunnels
• tunnelStatus—State of tunnels for which information is displayed; one of the following:

• disabled—Tunnel is disabled
• down—Tunnel is not operational
• enabled—Tunnel is enabled
• lower-down—Interface layer below the tunnel is not operational
• not-present—Tunnel service module is not in slot
• up—Tunnel is operational

• tunnelName—Name of a tunnel for which you want to display information
• vrName—Name of a virtual router for which tunnel information is displayed
• ipAddress—IP address associated with tunnel
• filter—See Filtering show Commands in About This Guide
• summary—Displays summary information

Mode(s): 

Privileged Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.