JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show controllers t3 remote

show controllers t3 remote

Description: 

Displays information about the statistics on the remote device when MDL is configured on a T3 interface or FDL is configured on a T1 channel.

Syntax: 

show controllers t3 interfaceSpecifier remote [ all ] [ filter ]

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• all—Shows statistics for all time intervals, rather than statistics for selected time intervals
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.