JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show controllers sonet

show controllers sonet

Description: 

Displays the statistics or the configuration for the different layers of channelized SONET and SDH interfaces.

Syntax: 

show controllers sonet { [ brief ] | interfaceSpecifier [ :controllerSpecifier ]
{ [ configuration ] | layerType [ interval | total [ delta ] ] |
controllerType [ interval ] | all [ total [ delta ] ] } } [ filter ]

• brief—Displays a summary of information about all controllers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• controllerSpecifier—One of the following:

• For a section or line, there is no controllerSpecifier
• For a path, the number of the path
• For a tributary, specified in the format
  pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
• For an E1 or a DS1 controller, specified in the format
  pathChannel [ /pathPayload ] [ /tributaryGroup ] [ /tributaryNumber ]
  [ /channelGroup ]
• For a DS3 controller, specified in the format
  pathChannel ds3-channel-number [ ds1-channel-number ]
  [ subchannelNumber ]

• pathChannel—Number of the path
• pathPayload—Number of the payload within the path. In SONET mode, pathPayload is always 1. In SDH mode, pathPayload is the number of the TUG-3 group.
• tributaryGroup—Number of the tributary group within the path. In SONET mode, tributary group is the number of the VT group. In SDH mode, tributary group is the number of the TUG-2 group.
• tributaryNumber—Number of the tributary within the group. In SONET mode, tributaryNumber is the number of the VT. In SDH mode, tributaryNumber is the number of the TUG-1 group or tributary unit.
• channelGroup—Number of the channel group
• ds3-channel-number—Number of the ds3 channel
• ds1-channel-number—Number of the ds1 channel in the range 1–28
• subchannelNumber—Number of the subchannel in the range 1–24

• configuration—Displays the configuration of each controller at the specified level and above
• layerType—Type of SONET/SDH layer

• section—Section layer of an interface
• line—Line layer of an interface
• path—SONET or SDH path

• interval—Number of 15-minute intervals over which the router monitors information; a value in the range 1–96; default value is the current interval, number 1
• controllerType—Type of interface or channel

• tributary—SONET or SDH virtual tributary
• e1—E1 channel over SDH virtual tributary
• ds1—T1 channel over SONET/SDH virtual tributary
• ds3—T3 over channelized SONET interface
• t1—T1 channel on T3 over channelized SONET interface

• total—Displays the MIB statistics for all intervals
• delta—Displays baselined statistics for all intervals
• all—Shows statistics for all time intervals, rather than statistics for selected time intervals
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.