JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show bgp ipv6 paths

show bgp ipv6 paths

Description: 

Displays information about IPv6 BGP AS paths.

Syntax: 

show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
paths [ pathExpression ] [ filter ]

• unicast—Specifies the IPv6 unicast address family and routing table; the default option
• multicast—Specifies the IPv6 multicast address family and routing table
• vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and forwarding instances
• vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN routing and forwarding instance with the name vrfName
• route-target signaling—Specifies the route-target address family
• pathExpression—See the show ip bgp regexp command for descriptions
• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.