JUNOSe 9.1.x Command Reference Guide N to Z > S Commands > show atm subinterface

show atm subinterface

Description: 

Displays the current state of all ATM subinterfaces that you specify.

Syntax: 

show atm subinterface
[ summary | atm interfaceSpecifier | summary atm interfaceSpecifier |
status operatingStatus ] [ filter ]

• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers in About This Guide
• summary—Specifies that summary information is displayed
• status—Displays information only for the ATM subinterfaces with the specified operating status
• operatingStatus—One of the following operating states:

• dormant
• dormantLockout
• down
• lowerLayerDown
• notPresent
• up

• filter—See Filtering show Commands in About This Guide

Mode(s): 

Privileged Exec, User Exec

Release Information: 

Command introduced before JUNOSe Release 7.1.0.

    Related Topics    

• Configuring an MPLS Pseudowire with VCC Cell Relay Encapsulation
• Monitoring ATM Subinterfaces for Layer 2 Services over MPLS