JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path snmp trap link-status

path snmp trap link-status

Description: 

Enables SNMP link-status processing for the path layer of SONET and SDH interfaces. The no version disables SNMP link-status processing.

Syntax: 

For channelized OCx/STMx interfaces:

[ no ] path pathChannel snmp trap link-status

For unchannelized OCx/STMx interfaces:

[ no ] path snmp trap link-status

• pathChannel—Number, in the range 1–2147483648, that identifies the path on a channelized interface

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.