JUNOSe 9.1.x Command Reference Guide N to Z > O-P-Q-R Commands > path overhead c2

path overhead c2

Description: 

Overrides the default value of the path signal label (C2) byte for SONET and SDH interfaces. The no version restores the default setting, which depends on the types of interface layers configured above the SONET/SDH interface.

Syntax: 

For channelized OCx/STMx interfaces:

[ no ] path pathChannel overhead c2 byteValue

For unchannelized OCx/STMx interfaces:

[ no ] path overhead c2 byteValue

• pathChannel—Number, in the range 1–2147483648, that identifies the path on a channelized interface
• byteValue—Value for C2 byte; integer, in the range 0–255

Mode(s): 

Controller Configuration

Release Information: 

Command introduced before JUNOSe Release 7.1.0.